Item #: STRC-F
Sitar Fiberglass Case, Double Toomba (Item Code: STRC-F) Hard shell fiberglass case with a padded interior for a full size sitar. It has two hand grips for flexibility in carrying. when you have long distance there are wheels so you can pull it along. The approximate inside dimensions are: over all length 50.5 inches (1282.7 mm); Depth 12.52 inches (317.5 mm); Width for top toomba: 10 inches (254 mm); width for bottom toomba: 14.5 (368.3 mm) Colors may vary from photo.
Item #: STRC
Sitar Hard Case, Double Toomba Wooden case with cloth covering. Designed for the double toomba style Sitar. Colors may vary from the photograph. The approximate inside dimensions are: over all length 50.5"; length of Large toomba compartment: 13.5"; Depth 12.5"; Width at top: 8"; width at bottom: 16"
Item #: PUBTI
This top performance, wide-range, twin-head piezo transducer system was especially designed for bigger instruments with low mechanical resonance. The two heads allow for positioning at two spots which results in improved balance of the sound and a wider and absolutely flat frequency response. The Big Twin is recommended for sitars, but, it is also great for harps, dulcimers, ouds and many other string instruments. The pickup head is attached with a special double-side adhesive film, which is UV resistant to ensure safe adhesion even after years of use. It is ultra-thin and enables the harmonic frequencies to completely pass through to the pickup disk. Technical Information Pickup head diameter: 3/4" Height: 1/32" Impedance: High ohmic Length of connection cable: Internal Jack: Quarter inch, connected mono, with nylon shell
Item #: STMP-FF
Fret, Sitar, Full Set. A full set of pre-shaped sitar frets for deluxe, fancy and professional models. Each fret is numbered beginning with #1 at the top and #20 at the bottom of the neck. Neck width is approx. 9 mm. The frets are .190" in thickness, they fit on a sitar neck that is approx. 3.6" wide and with a height of approx. .6" to top of fret.