The Roosebeck Microfiber Polishing Cloth is a superior, innovative, chemical free, hypoallergenic cloth for polishing your instruments. One strand is 100 times thinner than the thickness of human hair, and is made of polyester 80% and nylon(polyamide) 20%. Microfiber is preferred for its very lightweight, super absorbency, and rapid drying properties. It has a soft and delicate powder-like touch. It is approximately 11" x 11" square.

Planet Waves Lemon Oil is a natural cleaner and conditioner formulated to remove dirt, grease and build-up from unfinished woods on all string instruments. It's particularly recommended for use on fretboards and unfinished woods. Lemon Oil also helps to condition your instrument to resist dryness which can prevent cracks and extend its life.

• Natural cleaner and conditioner protects your guitar
• Removes dirt, grease, and wax build up
• Helps condition your instrument to resist dryness
• Extends the life of instruments
• Recommended for use on unfinished woods

Harp Rubber Tuning Bands - Great for highlighting both the tuning pins and levers for the C and F strings on your harp. Pack includes 10 red and 8 blue .354 inch in length x .220 inch diameter.

Harp Bridge Pins, Pack of 6. (Item Code: HPNB) These bridge pins are meant to fit the Pixie Harp (TM), Heather Harp (TM), and Minstrel Harp (TM). They are approximately 1.25 inches long, with a 5/32" diameter (37mm L x 4mm D). The one end has a groove that holds the string. These pins are hand made so expect some variation in size.

Harp Bridge Pins, Long, Pack of 6 (Item Code: HPNB-L) These bridge pins are meant to fit the Heather Harp (TM), and Minstrel Harp (TM). They are approximately 1.57 inches long, with a 5/32" diameter (40mm L x 4mm D). The one end has a grove that holds the string. These pins are hand made so expect some variation in size.

Harp Bridge Pins, Long, Thick, Pack of 6 (Item Code: HPNB-LTK) These bridge pins are meant to fit the Heather Harp (TM), and Minstrel Harp (TM). They are approximately 1.75 inches long, with a 7/32" diameter (48mm L x 6 mm D). The one end has a grove that holds the string. These pins are hand made so expect some variation in size.

The new and improved Snark ST-8 model includes a faster processing chip, enhanced accuracy, and new high definition screen that can be read from any angle.

Harp Tuning Pins, Pack of 6. These tuning pins are meant to fit the Pixie Harp (TM), Heather Harp (TM), and Minstrel Harp (TM). They are approximately 2 5/8 inches long. These pins are hand made so expect some variation in size.

The pegs are tapered so to change your tuning pin, remove the string and place your tuning wrench over the string end of the pin. Then tap on the wrench to tap the pin out through the harp arm. Replace the pin by inserting from the tuning side. Place the tuning wrench on the tuning end of the pin and tap it into place. The tuning ends of the pins should all be aligned. If necessary, wooden toothpicks make great shims.

Harp Tuning Pins, Long, Pack of 6 (Item Code: HTNP-L) These tuning pins are meant to fit the larger harps (HMGA, HRB38). They are approximately 3 inches long. These pins are hand made so expect some variation in size.

The pegs are tapered so to change your tuning pin, remove the string and place your tuning wrench over the string end of the pin. Then tap on the wrench to tap the pin out through the harp arm. Replace the pin by inserting from the tuning side. Place the tuning wrench on the tuning end of the pin and tap it into place. The tuning ends of the pins should all be aligned. If necessary, wooden toothpicks make great shims.

These tuning pins are meant to fit the smaller harps (HLLA-K & HP08). They are approximately 1.75 inches in length. These pins are hand made so expect some variation in size. The pegs are tapered so to change your tuning pin, remove the string and place your tuning wrench over the string end of the pin. Then tap on the wrench to tap the pin out through the harp arm. Replace the pin by inserting from the tuning side. Place the tuning wrench on the tuning end of the pin and tap it into place. The tuning ends of the pins should all be aligned. If necessary, wooden toothpicks make great shims.

These tuning pins are meant to fit the smaller harps (HLLA-K & HP08). They are approximately 2 inches in length. These pins are hand made so expect some variation in size. The pegs are tapered so to change your tuning pin, remove the string and place your tuning wrench over the string end of the pin. Then tap on the wrench to tap the pin out through the harp arm. Replace the pin by inserting from the tuning side. Place the tuning wrench on the tuning end of the pin and tap it into place. The tuning ends of the pins should all be aligned. If necessary, wooden toothpicks make great shims.

19 DuPont Tynex hard nylon monofilament strings of different gauges. Strings are color coded in red, blue and clear to make it easier to play. This string set fits our 19 stringed Pixie Harps TM (HPXA and HPXP) and our 19 stringed EMS Gothic Harp (HGH19).

Please Note: If you can't find the string set you are looking for, please contact us at info@mid-east.com