Hard shell fiberglass case with a padded interior for a full size single toomba sitar. It has two hand grips for flexibility when carrying. Colors may vary from photo.

The approximate inside dimensions are:

Overall Length: 50.5 inches (1282.7 mm); Depth: 12.52 inches (317.5 mm); Width for Bottom Toomba: 14.5 (368.3 mm).  

Neck width for the sympathetic pegs area is 5.25 inches

Neck width for the main peg area is 6.25 inches

Sitar Fiberglass Case, Double Toomba (Item Code: STRC-F) Hard shell fiberglass case with a padded interior for a full size sitar. It has two hand grips for flexibility in carrying. when you have long distance there are wheels so you can pull it along. The approximate inside dimensions are: over all length 50.5 inches (1282.7 mm); Depth 12.52 inches (317.5 mm); Width for top toomba: 10 inches (254 mm); width for bottom toomba: 14.5 (368.3 mm) Colors may vary from photo.

BLEMISHED: Hard shell fiberglass case with a padded interior for a full size single toomba sitar. It has two hand grips for flexibility when carrying. Colors may vary from photo.

The approximate inside dimensions are:

Overall Length: 50.5 inches (1282.7 mm); Depth: 12.52 inches (317.5 mm); Width for Bottom Toomba: 14.5 (368.3 mm).  

Neck width for the sympathetic pegs area is 5.25 inches

Neck width for the main peg area is 6.25 inches

A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of full size professional, RKS sitars. Coloring and carvings may vary. It may be used with STLP and STRPR.

Sitar Toomba, Fancy. A hand carved wood & fiber glass toomba with a threaded brass fitting for mounting on the neck of full size fancy Sitars. The fiber glass is in the bottom half.  Coloring and carvings may vary.

Sitar Toomba, Fancy (Item Code: STMP-TF) A hand carved wooden gourd toomba with a threaded brass fitting for mounting on the neck of full size fancy Sitars. Coloring and carvings may vary.

Sitar Toomba, Ultra (Item Code: STMP-TU) A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of full sized Ultra Professional Sitars. Coloring and carvings may vary.

Sitar Toomba, Professional (Item Code: STMP-TP) A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of full sized professional Sitars. Coloring and carvings may vary.

Sitar Toomba, Fancy, Leaves (Item Code: STMP-TF-L) A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of full size fancy Sitars. Coloring and carvings may vary.

Sitar Toomba, Light (Item Code: STMP-TL) A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of full sized standard Sitars. Coloring and carvings may vary.

Sitar Toomba, Dark (Item Code: STMP-TD) A hand carved wooden toomba with a threaded brass fitting for mounting on the neck of the dark standard size sitars. Coloring and carvings may vary.

This top performance, wide-range, twin-head piezo transducer system was especially designed for bigger instruments with low mechanical resonance. The two heads allow for positioning at two spots which results in improved balance of the sound and a wider and absolutely flat frequency response. The Big Twin is recommended for sitars, but, it is also great for harps, dulcimers, ouds and many other string instruments. The pickup head is attached with a special double-side adhesive film, which is UV resistant to ensure safe adhesion even after years of use. It is ultra-thin and enables the harmonic frequencies to completely pass through to the pickup disk. Technical Information Pickup head diameter: 3/4" Height: 1/32" Impedance: High ohmic Length of connection cable: Internal Jack: Quarter inch, connected mono, with nylon shell