Chime bars are suspended above the wood base for a clear resonating tone. The chime is at once invigorating and calming. Keep a couple around the house for a little pick-me-up throughout your day. Or use it for a meditative break in the office. ...

Chime bars are suspended above the wood base for a clear resonating tone. The chime is at once invigorating and calming. Keep a couple around the house for a little pick-me-up throughout your day. Or use it for a meditative break in the office. ...

Chime bars are suspended above the wood base for a clear resonating tone. The chime is at once invigorating and calming. Keep a couple around the house for a little pick-me-up throughout your day. Or use it for a meditative break in the office. ...

Chime bars are suspended above the wood base for a clear resonating tone. The chime is at once invigorating and calming. Keep a couple around the house for a little pick-me-up throughout your day. Or use it for a meditative break in the office. ...

Shake ‘em or strike ‘em. The two hollow sticks are filled with pellets to produce a shaker sound, yet they’re solid enough on each end to play like claves. Very versatile and an economical addition to any hand percussion collection. 7 inches long ...

There's only one way to describe the sound this funny little instrument makes – "boing-boing"! Press your thumb on the flexible steel plate as you shake the instrument up and down. The attached mallet strikers hit the plate at various tension levels

This cane flute is a straight, side blown (or transverse) bamboo flute in the key of A, fourth octave. Play by holding the flute horizontally while blowing across the sound hole, using the six finger holes to produce different notes. The "A" flute ...

Straight Bamboo pipe in B4. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 14 inches long.

Straight Bamboo pipe in C5. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 13.5 inches long.

Straight Bamboo pipe in D4. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 23.5 inches long.

Straight Bamboo pipe in D". 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 12 inches long.

Straight Bamboo pipe in E4. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 21 inches long.

Straight Bamboo pipe in F4. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 20 inches long.

Straight Bamboo pipe in G4. 7 front holes. Held horizontally one blows into the first hole, while playing on the other 6. These are simple cross blown cane flutes. Approximately 17 inches long.

This 10 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

This 12 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

This 14 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

This 16 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

This 18 inch diameter frame drum shell consisting of 3 layers of mulberry wood for a total thickness of 5/16 inches and a depth of just under 3 inches. All edges are rounded over.

Shaman Drum 10"x2", fixed goatskin head, rosewood frame, includes leather beater.

Shaman Drum 12"x2", fixed goatskin head, rosewood frame, includes leather beater.

Shaman Drum 14"x2", tunable goatskin head, mulberry frame, includes leather beater and tuning tool.

Shaman Drum 14"x2", fixed goatskin head, rosewood frame, includes leather beater.

Shaman Drum 16"x 2", tunable goatskin head, mulberry frame, includes leather beater and tuning tool.

Shaman Drum 18"x2", tunable goatskin head, mulberry frame, includes leather beater and tuning tool.

Frame Drum, 18 inch, with Beater (Item Code: FD18) Shaman Style Drum 18 inches in diameter by 2 deep, fixed goatskin head mounted on a solid rosewood frame with rawhide braces in the back for support. Includes leather beater.

Frame Drum, 22", Interior Tuning. Shaman Drum 22"x2", goatskin head with interior tuning, mulberry frame, includes leather beater.

Shaman Drum 22"x2", fixed goatskin head, rosewood frame, includes leather beater.

Shaman Drum 30" x 2.25" rosewood frame, with a tunable goatskin head. Two rawhide straps cross in the back to give support to the frame, and can be used to steady the drum. The Tuning mechanisms are mounted on the inside of the frame for a clean ...

Shaman Drum 30"x2", fixed goatskin head, rosewood frame, includes leather beater. Actual weight is only about 3 lbs. Due to its size it ships in a 30 lbs. box.

Shaman Drum 38" x 2.25" rosewood frame, with a tunable goatskin head. Two rawhide straps cross in the back to give support to the frame, and can be used to steady the drum. The Tuning mechanisms are mounted on the inside of the frame for a clean ...

The unmistakable "ribb-itt" sound comes from scraping the stick over the ridges on froggy’s back. You can also tap the stick on his head for a wood block sound. The larger the frog, the lower the tone, so why not adopt the whole family? Hold him in

The unmistakable "ribb-itt" sound comes from scraping the stick over the ridges on froggy’s back. You can also tap the stick on his head for a wood block sound. The larger the frog, the lower the tone, so why not adopt the whole family? Hold him in

The unmistakable "ribb-itt" sound comes from scraping the stick over the ridges on froggy’s back. You can also tap the stick on his head for a wood block sound. The larger the frog, the lower the tone, so why not adopt the whole family? Hold him in

The unmistakable "ribb-itt" sound comes from scraping the stick over the ridges on froggy’s back. You can also tap the stick on his head for a wood block sound. The larger the frog, the lower the tone, so why not adopt the whole family? Hold him in

The unmistakable "ribb-itt" sound comes from scraping the stick over the ridges on froggy’s back. You can also tap the stick on his head for a wood block sound. The larger the frog, the lower the tone, so why not adopt the whole family? Hold him in

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 1 1/2" x 11".

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 2" x 13".

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 2 1/2" x 18".

This gong beater made from solid mulberry and dense foam wrapped by nylon. It is approximately 1 1/4" x 9".

Gong handle made from solid rosewood. This smooth wood handle provides the most comfortable grip when playing your gong. Easy to use, just thread the gong-rope trough the handle from end to end. The open bore of the handle will accommodate ropes ...

BLEMISHED Gong Stand, Frame (14" holding size) (Item Code: GS4F-2) 26"W x 28"H x 10 1/2"D. Solid rosewood frame, carved cross arm, some assembly (6 screws) required. Gong sold separately.

Scratch & Dent Savings!!! Product ...

Hand made gong stand constructed of rosewood. Hold up to a 22" gong. Gongs are sold separately.

Hand made gong stand constructed of rosewood including a 4 inch Yun gong. The Yun gong is our smallest gong made with traditional methods by artisans in China from a bronze alloy which is roughly 80% copper and 20% tin.

26"W x 28"H x 10 1/2"D. Solid rosewood frame, carved cross arm, some assembly (6 screws) required. Gong sold separately.

Hand made gong stand constructed of rosewood. Hold up to a 14" gong. Gongs are sold separately.

Hand made gong stand constructed of rosewood. Hold up to a 18" gong. Gongs are sold separately.

Hand made gong stand constructed of rosewood. Hold up to a 22" gong. Gongs are sold separately.

Hand made gong stand constructed of rosewood. Hold up to a 26" gong. Gongs are sold separately.

Hand made gong stand constructed of rosewood. Hold up to a 4" gong. Gongs are sold separately.