The Banjira Rudra Veena String Set consists of looped end strings with the following diameters and materials:

The Banjira Vitchitra Veena String Set consists of looped end strings with the following diameters and materials:

Main bridge for the rudra veena.

Rudra Veena Nut, Bone (Item Code: RUDN) This is a natural material and you should expect some variations. 3.125 wide by 1.75 inches tall and 0.25 inches wide (7.9 cm wide x 4.3 cm tall and .5 cm wide)

7 strings in one set. 3 brass strings, 3 steel strings and 1 copper string.

Rudra Veena Tuning Peg Set of 7

Lotus flower design. Sizes vary most are 9 inches in length. The fit will need to be adjusted with sanding, and the excess length cut off.

Replacement bridge for the Saraswati Deluxe.

Saraswati Veena Bridge Set, Painted. Painted to add to the appeal. Replacement bridge for the Saraswati Deluxe. Colors may vary from photograph.

Saraswati Veena Case (Item Code: VENC) It is cloth covered plywood and weighs approximately 10-15 pounds. This item requires special shipping by Motor Freight.

The internal dimensions of the case are approximately: Length 54.5 inches, width at

Saraswati Veena Tuning Peg Set of 7 (Item Code: VENP) The set contains 7 pegs. These are standard pegs and will require fitting to your individual instrument. Expect to trim the length, and or, to sand the shaft of the peg to the proper size.

Saraswati Veena Tuning Peg Single (Item Code: VENP-S) One replacement standard peg. it will require fitting to your individual instrument. Expect to trim the length, and or, to sand the shaft of the peg to the proper size.

Each set has seven metal strings. They are as follows:

0.024 - bronze - 62.5 inches

0.019 - bronze - 61.5 inches

0.013 - steel - 63 inches

0.01 - steel - 63 inches

0.01 - steel - 63 inches

0.008 - steel

Standard sympathetic string tuning peg for a victra veena. Light finish. Approximately 8.5- 9 inches in length. The fit will need to be adjusted with sanding, and the excess length cut off.

Standard sympathetic string tuning peg for a victra veena. Light finish. Approximately 7 inches in length. The fit will need to be adjusted with sanding, and the excess length cut off.

Vitchitra Veena 2 piece Tuning peg set. 1 main and 1 sympathetic.

Main and sympathetic bridges for the vitchitra veena.

This set contains 7 wire strings, in bronze and steel.

Gage Type Length

0.025 bronze 60.5 inches

0.018 bronze 62 inches

0.010 steel 61.25 inches

0.011 steel 61.25 inches

0.013 steel 62 inches

0.010 steel ...